Reusable Sediment Guards 30-Pack (SFPADS)

It depends on your water quality, there's no fixed replacement schedule the way there is for a filter cartridge. If you notice a drop in water pressure, that's usually sediment building up in the guards, and rinsing them under high-pressure water while rubbing them together to release trapped particles will usually restore flow. In areas with higher sediment levels, or on well water, you may need to rinse them more often. Because they're designed to be reused several times before replacing, most households only need to swap in a new guard occasionally, some staining may remain on the guards even after cleaning, that's normal and doesn't affect how well they work.

These sediment guards are compatible with the Daily Revitalize+ (SF400) and Daily Essential+ (SF500) shower filters, and their Daily Revitalize+ (SFC400) and Daily Essential+ (SFC500) replacement cartridges, the only two models in the Aquabliss range built with removable sediment guards. They aren't compatible with the Daily Revitalize (SF100) or Daily Essential (SF220), or their SFC100/SFC220 cartridges, which use fine stainless steel mesh and PP cotton to capture sediment instead, without a separate guard component.

Yes. To clean them, unscrew the end caps on your cartridge counterclockwise, remove the guards, and rinse under high-pressure water while rubbing them together to release trapped sediment. They can be reused several times this way, replace them once rinsing no longer restores your water pressure or flow, rather than on a fixed schedule. With 30 guards in the pack, most households have enough on hand to cover a long stretch of replacements without reordering.

No tools required. Unscrew the end caps on your cartridge by hand, swap in the fresh guard, and screw the end cap back on, the same process you'd use to rinse and reinstall an existing guard. The whole process takes around two minutes.

The sediment guards sit ahead of your cartridge's main filtration stage, catching larger sediment particles, dirt and grit before they reach it. That protects the cartridge's finer filtration media from getting clogged too quickly, and keeps that sediment from reaching your skin and hair in the meantime.

No, not when they're clean. They're designed to maintain full water flow alongside the rest of your filter's multi-stage filtration. If you do notice reduced pressure, that's a sign sediment has built up inside the guards rather than the guards themselves restricting flow, rinsing them usually resolves it.

No, they're separate components. The cartridge handles the main filtration work, chlorine reduction and, on the Daily Revitalize+ (SF400), Vitamin C and mineral infusion. The sediment guards sit ahead of that, catching larger particles before they reach the cartridge. They're on different maintenance cycles too, the cartridge is replaced every 3–6 months, while the guards can be rinsed and reused multiple times before needing to be swapped.

If you're noticing reduced water flow, start by rinsing the sediment guards, that resolves it in most cases. If flow is still reduced after rinsing, or it's been 3–6 months since your last cartridge change, it's likely your cartridge (SFC400 or SFC500) that needs replacing instead. A returning chlorine smell is also a cartridge sign rather than a sediment guard one, since the guards don't affect chlorine reduction.